Inductive Proximity Switches – DC Type (Cylindrical Series)

Inductive-proximity-switc-M18-ABS-plastic

Inductive-proximity-switch-M18

Inductive-proximity-switch-M12

Inductive-proximity-switches

Omega Electro Controls offers Inductive proximity switches for sensing Ferrous materials. This type of switches work on ‘Damped Oscillator’ principle. During operation a frontally radiated electromagnetic oscillating field is projected from the sensing face. Any electrically conductive material entering this field causes damping of the oscillation.This change is detected by the in-built sensitive & reliable electronic circuit and is converted into an effective output signal.

General Specifications

Diameter 06/08/12/18/30/36 mm.
Length 65 mm
Range 1/1/4/5/8/10/15mm
Type Flush and Non Flush Type
Supply 10 – 30V DC,3 wire type
Output PNP / NPN and  NO / NC
Housing Plated Brass/ABS

Technical Specifications

Power Supply 10 – 30 Volts DC
Output Indications Through LED
Output PNP / NPN  and NO / NC
Diameter Of Sensor 6 / 8 / 12 / 18 /30 /36 mm
Supply Protection Protected  Reverse Polarity &Short Circuit
Housing Plated Brass/ABS
Sensing Range 1 / 1/ 2.5 – 3.5 / 5 – 7/ 10 – 15 / 20mm
Operating Temp. Upto 55 Degree C
Length of the sensor 65 / 45 / 55 / 70 / 65 / 65mm

Applications

Used for Counting / Position Sensing of various objects in Plastic and Packaging Industry, Bulk Material handling, Automobile, Steel Plants, Fertilizer ,Cement, Engineering, Machine Tools, etc Industries